One-Lock Quickstart Foil Package

Performance & Feel

The Ease monobloc front wing has a medium camber with its thickest point set well forward, so it lifts at low speed and lets go gradually when you slow down too much, giving you time to recover. Available in the 1850 or 2250 Centre Focused Lift keeps the foil feeling smooth and settled when your weight shifts or your timing is off. The Verse monobloc 270 tail adds to that and is the most stable stabiliser in the One-Lock range. Its anhedral tips ease the foil back upright if it starts to roll, and the extra surface area settles pitch angles so small mistakes don’t throw you.

The Aluminium Mast is stiff and predictable, and the One-Lock collar at its foot takes the front wing and tail internally with no screws. Up top, the RTS kit means that once you’ve set your mast position, the foil goes on and off the board in under 30 seconds without tools. Available in three length options.

On sizing, bigger front wings lift earlier and ride slower, which is what you want for your first sessions and lighter wind, while smaller sizes are quicker and looser. For mast length, shorter is more stable and suits shallow water, longer gives more clearance through chop, and 82cm is the happy middle ground for most wing foilers. Call or drop in if you’re not sure which size to go for.

Key Features

• Ease monobloc front wing: forward maximum thickness and medium camber for strong low-end lift and a gradual stall, with Centre Focused Lift under your feet available in two sizes 1850 and 2250
• Verse monobloc 270 tail: the most stable One-Lock stabiliser, with anhedral wing tips that self-correct in roll and a -2.25° preset angle for consistent lift at low speed
• Aluminium Mast: 6061 aluminium with a 118mm chord, anodised against corrosion, in three length options 72cm, 82cm and 92cm
• One-Lock collar: front wing and tail lock in at the base of the mast without screws, for a tight connection and clean water flow
• RTS mounting kit: fit and remove the foil in under 30 seconds once the position is set
• Monobloc front wing and tail: fuselage sections are moulded into the wings for a stiffer, lower-drag connection
• Modular: upgrade any part separately as you progress