Voltt 5/4/3mm Front Zip wetsuit

Performance & Feel

The Voltt sits at the top of Mystic's range for warmth and it's the suit they build for riders who don't want the season to stop just because the elements are so cold!. MX4 Yamamoto 39 neoprene in graduated thickness runs 5mm through the core, 4mm through the chest and upper legs and 3mm through the arms and lower legs, so the warmth stays where you lose heat fastest.

Flaremesh+ runs through the chest, back and lower body, channelling water through the fabric so the suit drains and dries fast, and Fox Fleece fills every other panel with a high-pile lining that traps air for insulation. Windmesh panels across the chest and back use a closed-cell outer face to block the wind chill and an embossed patterned superstretch outer does the same job across the rest of the suit. Every seam is glued, blind-stitched and taped at 100%, not just the critical areas, and an Aquabarrier is printed across the collars to seal the overlapping front zip panels.

Embossed panels behind the knees free up leg movement, Hex-Tech kneepads take the wear of kneeling, and Aquaflush 2.0 on the lower legs lets water out. Velcro ankle straps, non-slip cuffs and heat-sealed cuff edges close the openings down, and there's a Key Pocket 2.0 with a mini-buckle key loop. As a 5/4/3 it's a deep winter suit for UK water, built for the coldest months of the year.

Key Features

• MX4 Yamamoto 39 neoprene: limestone-based rubber with high stretch and strong insulation
• Graduated 5/4/3 thickness: thickest through the core, thinner through the legs and arms so warmth and movement both land where they're needed
• Flaremesh+ chest, back and lower body lining: high-pile lining that channels water through the fabric to cut drying time
• Fox Fleece in all other panels: high-pile thermal lining that holds air for insulation and holds less water, so every panel is lined
• Windmesh chest and back panels: closed-cell outer face that blocks windchill where it hits hardest
• Emboss patterned superstretch outer: closed-cell outer across the suit for wind protection and stretch
• 100% waterproof stretch-taped GBS seams: every seam glued, blind-stitched and internally taped, not just the critical areas
• YKK front zip: hard-wearing zip across the chest for easy entry and an unbroken back panel
• Aquabarrier: silicone printing across the collarbone that stops water entering between the front zip panels
• Back knee embossing: shaped behind the knee for freer leg movement
• Hex-Tech kneepads: hard-wearing protection for kneeling on your board
• Aquaflush 2.0: drainage on the lower legs that lets water out without letting it back in
• Velcro ankle straps, non-slip cuffs and heat-sealed cuff edges: close and seal the openings to reduce flushing
• Key Pocket 2.0: neoprene key pocket with a mini-buckle key loop